Heat is not one hazard but several. A glove that handles a hot tray from an oven is a very different product from one that protects a welder from sparks or a foundry worker from molten metal splash.

EN 407 is the standard that tests gloves against thermal risks. Knowing how to read the rating helps you pick heat protection gloves that match the real hazard rather than simply the highest temperature on the packaging.

What does EN 407 measure?

The marking shows a flame pictogram followed by up to six performance levels, each covering a different thermal risk:

PositionWhat it measuresRating range
1stResistance to flammability0–4
2ndContact heat0–4
3rdConvective heat0–4
4thRadiant heat0–4
5thSmall splashes of molten metal0–4
6thLarge splashes of molten metal0–4

A rating of 0 means the glove did not reach the minimum level. An X means the test was not carried out. The current version is EN 407:2020, although you will still see older gloves marked to the 2004 version.

What do the contact heat levels mean?

Contact heat is the rating most people look at first. It shows the temperature at which the glove can be held for at least 15 seconds before the inside becomes uncomfortably hot.

LevelContact temperature
1100°C
2250°C
3350°C
4500°C

The 15-second threshold matters. It is a test result, not a safe working time, so gloves are not meant for prolonged handling of hot items at the top of their range.

What about flame, radiant heat and molten metal?

  • Flammability: how long the glove keeps burning or glowing after the flame is removed. Higher is better.
  • Convective heat: protection against hot air or gases.
  • Radiant heat: protection from heat given off by hot surfaces or flames, common near furnaces.
  • Molten metal splash: small and large splash ratings are important in foundries, casting and metal pouring.

A glove can score well in one area and poorly in another, so always read the full rating.

How do welders’ gloves differ from general heat gloves?

Welders’ gloves are tested to EN 12477 as well as EN 407. They are designed for sparks, spatter and radiant heat, and usually come in two types:

  • Type A: heavier-duty, for processes such as MMA (stick) and MIG welding
  • Type B: thinner and more flexible, for precision work such as TIG welding

General-purpose heat gloves usually focus on contact heat and are not designed for welding sparks or spatter. Our welders gloves range is built for these conditions.

Does a higher heat rating always mean a better glove?

Not necessarily.

High-protection gloves tend to be thicker and less flexible, which can make delicate tasks harder. The right glove balances protection against dexterity, grip and comfort for the job in hand.

Why does this matter to businesses?

Burns are painful, can cause lost working days and are largely preventable. Matching the glove to the hazard is part of a proper risk assessment, whether for welders, foundry work, catering or sheet metal handling.

How should you choose heat resistant gloves?

Identify the heat source first, then check:

  • The relevant EN 407 level for that hazard
  • Whether welding standard EN 12477 applies
  • Cut and abrasion needs (see EN388 ratings)
  • Wet or oily conditions, which can reduce heat protection
  • Cuff length and fit

Quick answer

EN 407 rates gloves for flammability, contact heat, convective heat, radiant heat and molten metal splash, each from 0 to 4. Choose the rating that matches your real hazard, and use gloves made to EN 12477 for welding.

Browse heat protection gloves or contact our team for advice.