Workers who use breakers, grinders, chainsaws and other vibrating tools can develop a painful, permanent condition called hand-arm vibration syndrome, or HAVS. It develops gradually, and by the time symptoms are obvious, the damage may already be done.

Anti-vibration gloves are often seen as the answer, but they are only part of the picture. Here is what employers need to know.

What is HAVS?

HAVS is a condition caused by regular, prolonged exposure to vibration through the hands and arms. Symptoms include:

  • Tingling or numbness in the fingers
  • Loss of grip strength and dexterity
  • Finger blanching, sometimes called vibration white finger
  • Pain or cold sensitivity in the hands

Once established, HAVS is generally irreversible, which is why prevention matters.

What do the Control of Vibration at Work Regulations 2005 require?

In Great Britain, the regulations require employers to assess and control the risk from hand-arm vibration. They set two key daily exposure values, measured as A(8), an eight-hour energy-equivalent:

ValueLevelWhat it means
Exposure action value (EAV)2.5 m/s² A(8)Employers must act to control exposure, and provide health surveillance
Exposure limit value (ELV)5 m/s² A(8)Must not be exceeded

Employers must also provide information and training, and carry out health surveillance for at-risk workers. Diagnosed cases of HAVS are reportable under RIDDOR.

What is EN ISO 10819?

EN ISO 10819 is the standard for gloves that claim to reduce vibration. Gloves are tested for how much vibration passes through to the hand at medium and high frequencies, and must achieve set transmissibility limits to be certified.

If a glove is marked to EN ISO 10819, it has passed this test. A glove simply described as “anti-vibration” without the marking has not been verified to the standard.

What can anti-vibration gloves actually do?

Gloves can help in useful ways:

  • Keep hands warm, which supports blood circulation
  • Provide grip, comfort and some protection from cuts and abrasion
  • Reduce some higher-frequency vibration

Good anti-vibration gloves are a sensible part of any control plan.

What can’t they do?

Gloves have limits, and employers should not rely on them alone:

  • They do little to reduce low-frequency vibration, which is common in many tools
  • Their performance in real use can differ from laboratory results
  • Thick gloves can make workers grip tools harder, which may increase exposure
  • Gloves should not be used to justify longer trigger times

HSE guidance is clear that reducing vibration at source is the priority, with gloves playing a supporting role.

How can employers control HAVS risk?

  • Choose low-vibration tools and keep them well maintained
  • Use the right tool for the job rather than an oversized or worn one
  • Limit exposure time and rotate tasks
  • Train workers to recognise symptoms and report them early
  • Provide health surveillance where required
  • Support warm, well-fitting gloves as part of the plan

Does an anti-vibration glove make a tool safe?

Not necessarily.

A glove can improve comfort and reduce some vibration, but it does not remove the hazard. Risk assessment, tool choice and exposure limits remain the main controls.

Quick answer

HAVS is caused by regular exposure to vibrating tools and is usually permanent. The Control of Vibration at Work Regulations 2005 require UK employers to assess and control the risk. EN ISO 10819 gloves can help reduce some vibration and keep hands warm, but they should support, not replace, other controls.

Browse anti-vibration gloves or contact us for advice.